Aerodyn Capability Spotlight – Instrumentation

Published: November 20, 2020

Aerodyn pride ourselves on having been an integral part of the development of new gas turbine and other turbomachinery products for almost 20 years.

A measure of our success is the amount of repeat business we continue to do for our valued customers. We are a true partner to many OEM’s, who count on our services and expertise to develop their products.

Aerodyn have been awarded several long-term contracts within the Aerospace industry. We support our customers with Instrumentation and Flight Test Support for development, and compliance testing of gas turbines for civil and military applications.

Aerodyn have extensive experience in serving not only the Aerospace market but also the Power Generation, Automotive, Defense and Industrial OEM markets too.

Offering global support from our North American and UK bases, our engineers have supported projects in every continent of the world. Our in-house instrumentation capabilities including design and analysis, manufacture, assembly, and testing enable us to offer complete support to our customers – from conceptual design through to providing 24/7 coverage for flight test campaigns.

When appropriate, Aerodyn are always happy to provide consultancy based on experience, best practice or lessons learnt to ensure our customers stand the best chance of getting robust, repeatable and reliable measurements.


Instrumentation services we regularly provide:


Measurement Techniques | Sensor Selection | Requirements Scoping | Test Program Consulting | Verification and Validation | Technical Risk Management and Risk Reduction


Compressor Instrumentation | Turbine Instrumentation | Combustor Instrumentation | General Lead-out and Routing | Rework of Components


Sensor Application and Fabrication

Temperature Sensors | Pressure Sensors | Strain Gages | Custom Force Transducers | Rotating Sensors | Blade Tip Clearance/Capacitance Probes


Rakes and Probes

Total Temperature | Total Pressure | Flow Angle | Velocity | Mass Flow | Integral Kiel Heads | Vane Leading Edge Instrumentation


Data Acquisition

Custom DAQ built to spec powered by NI LabVIEWTM | Test Equipment for Rental or Purchase | Data Recording Rates up to 204kHz/Channel

Test Monitoring & Support

Global On-site Support | Multi Terminal Monitoring On-site | Flight Test Support | Remote Monitoring for Off-site Engineers

Data Analysis

Vibration (Modal, FFT, Waterfall, FRF, Order, Shaft Orbit) | Strain (Characterization, Calibration) | Acoustic (Octave, Power, Loudness)


If you have a instrumentation requirement you believe we can assist you with, please contact us.


  • Aerodyn exhibiting at ASME Turbo Expo 2023 in Boston, MA, USA – June 27th to 29th 2023

    June 19, 2023

    Aerodyn are very excited to be exhibiting at ASME Turbo once again this year. The annual turbomachinery technical conference and exposition will be held this year from 26th to 30th June 2023 at the Hynes Convention Center, Boston, MA, USA. Expo times are: Tuesday 27th June 2023 – 12:00 to 18:30 Wednesday 28thth June 2023 […]

    Read Post

  • Aerodyn exhibiting at ASME Turbo Expo 2022 in Rotterdam, June 13th – 17th 2022

    May 19, 2022

    Aerodyn are excited to be exhibiting at the ASME Turbo Expo again this year. The event will be held from 13th to 17th June 2022 at the Rotterdam Ahoy Convention Centre, Rotterdam, Netherlands. Exhibition times are: Tuesday 14th June 2022 – 12:30 to 18:30 Wednesday 15th June 2022 – 12:30 to 18:30 Thursday 16th June […]

    Read Post

  • Aerodyn First to Implement Revolutionary Machining Technology

    December 4, 2020

    “Blue Arc™ cuts hard to machine alloys like a hot knife slicing through butter” Blue Arc™ Machining technology is the latest cutting edge capability Aerodyn will be offering to our customers.  Blue Arc™ was originally developed by GE Global Research several years ago addressing the high cost of machining exotic aerospace alloys and other hard […]

    Read Post